Dry / Wet Rot & Woodworm Treatments

Professional Woodworm Treatment Lignum Pro I62.5 is a professional concentrated product containing an insecticide to eradicate and prevent attack by wood boring beetles. It is highly effective against all life stages of woodboring insects and woodworm. The formulation is water-based producing a Non-flammable, quick drying product containing no volatile organic compounds (VOCs). It has virtually no odour. How Insecticides Work Microemulsion technology allows the active ingredient Permethrin to penetrate deep into the timber. The pyrethroid insecticide is proven to work against a wide range of woodboring insects. How to Apply Concentrated Woodworm Killer Preparation: Ensure the wood is clean and free from dust and all contaminants. Application: The concentrated product is diluted with water. You can then apply with either a low pressure spray or brush to provide long lasting protection. Depending on wood and ambient conditions, it should be touch dry in one hour. After 24 hours, you should be able to overcoat the product again depending on conditions.

Coverage: 1L of concentrate treats 82.5 - 125m2 of timber depending on use.

Preventative: 200ml/m2 (1L per 5m2 ) Curative: 300ml/m2 (1L per 3.3m2 )

Dual Treatment: Protect Against Woodworm & Fungi This professional concentrated dual purpose product contains an insecticide and fungicide to protect and preserve timber. It is designed to eradicate and prevent attack by wood boring beetles and prevent wood destroying and discolouring fungi. Lignum Pro D156 is effective against a wide range of wood rotting fungi including both wet rot and dry rot whilst the pyrethroid insecticide is effective against all life stages of wood boring insects. It is also effective against fungal staining. The concentrated product is diluted with water and can be used during the drying out period after the elimination of the source of damp. It is virtually odourless and can be applied either by brush or low pressure spray to provide long lasting protection. How does the Dual Treatment Work? The dual purpose treatment uses microemulsion technology to ensure the active ingredients (a combination of insecticide & fungicide) can fully penetrate the timber. This product also contains IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 31.25g/L: a carbamate fungicide that is added to provide excellent efficacy against a range of wood staining fungi. How to Use Dual Treatment Wood should be clean and free from wood dust and other contaminants. Once diluted according to instructions, the woodworm and fungi treatment can be applied using a pressure spray or brush. The dual treatment does not have a finish but it is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected. Wood treated with Lignum dual purpose treatment can be overpainted, varnished or stained once dry (usually an hour after application). It is suitable for over coating 24 hours after application.

Coverage: 1L + 24L water : 200ml/m2 - 300ml/m2 (1L per 3.3 -5m2) 2L + 23L water : 100 - 200ml/m2 (1L per 5 - 10m2) *1L-2L of concentrate treats 82.5 - 250m2 of timber depending on use.

See chart in technical data sheet.

ProBor 20 is a ready-for-use wood preservative gel based on boron, a naturally occurring mineral with a long history of use. It is used for the treatment of dry rot and wet rot in larger dimension timbers (up to 25mm x 75mm). It is also effective against wood-boring insects and is particularly useful when treating infestations of Deathwatch Beetle.

ProBor 50 (HSE No. 5596) is a ready-for-use wood preservative paste based on boron, a naturally occurring mineral with a long history of use. It is supplied in a 400ml cartridge for use with a standard mastic gun. ProBor 50 is designed to be injected into timber or masonry. It can also be applied to the surface of timber, although it should be noted that a white deposit will be left.