Professional Woodworm Treatment Lignum Pro I62.5 is a professional concentrated product containing an insecticide to eradicate and prevent attack by wood boring beetles. It is highly effective against all life stages of woodboring insects and woodworm. The formulation is water-based producing a Non-flammable, quick drying product containing no volatile organic compounds (VOCs). It has virtually no odour. How Insecticides Work Microemulsion technology allows the active ingredient Permethrin to penetrate deep into the timber. The pyrethroid insecticide is proven to work against a wide range of woodboring insects. How to Apply Concentrated Woodworm Killer Preparation: Ensure the wood is clean and free from dust and all contaminants. Application: The concentrated product is diluted with water. You can then apply with either a low pressure spray or brush to provide long lasting protection. Depending on wood and ambient conditions, it should be touch dry in one hour. After 24 hours, you should be able to overcoat the product again depending on conditions.
Coverage: 1L of concentrate treats 82.5 - 125m2 of timber depending on use.
Preventative: 200ml/m2 (1L per 5m2 ) Curative: 300ml/m2 (1L per 3.3m2 )
Sold in 2mtr strips
Dual Treatment: Protect Against Woodworm & Fungi This professional concentrated dual purpose product contains an insecticide and fungicide to protect and preserve timber. It is designed to eradicate and prevent attack by wood boring beetles and prevent wood destroying and discolouring fungi. Lignum Pro D156 is effective against a wide range of wood rotting fungi including both wet rot and dry rot whilst the pyrethroid insecticide is effective against all life stages of wood boring insects. It is also effective against fungal staining. The concentrated product is diluted with water and can be used during the drying out period after the elimination of the source of damp. It is virtually odourless and can be applied either by brush or low pressure spray to provide long lasting protection. How does the Dual Treatment Work? The dual purpose treatment uses microemulsion technology to ensure the active ingredients (a combination of insecticide & fungicide) can fully penetrate the timber. This product also contains IPBC (3-Iodo-2-Propynyl Butyl Carbamate) 31.25g/L: a carbamate fungicide that is added to provide excellent efficacy against a range of wood staining fungi. How to Use Dual Treatment Wood should be clean and free from wood dust and other contaminants. Once diluted according to instructions, the woodworm and fungi treatment can be applied using a pressure spray or brush. The dual treatment does not have a finish but it is always advisable to try on a small inconspicuous area before application to ensure product finish is as expected. Wood treated with Lignum dual purpose treatment can be overpainted, varnished or stained once dry (usually an hour after application). It is suitable for over coating 24 hours after application.
Coverage: 1L + 24L water : 200ml/m2 - 300ml/m2 (1L per 3.3 -5m2) 2L + 23L water : 100 - 200ml/m2 (1L per 5 - 10m2) *1L-2L of concentrate treats 82.5 - 250m2 of timber depending on use.
See chart in technical data sheet.
ProBor 20 is a ready-for-use wood preservative gel based on boron, a naturally occurring mineral with a long history of use. It is used for the treatment of dry rot and wet rot in larger dimension timbers (up to 25mm x 75mm). It is also effective against wood-boring insects and is particularly useful when treating infestations of Deathwatch Beetle.
ProBor 50 (HSE No. 5596) is a ready-for-use wood preservative paste based on boron, a naturally occurring mineral with a long history of use. It is supplied in a 400ml cartridge for use with a standard mastic gun. ProBor 50 is designed to be injected into timber or masonry. It can also be applied to the surface of timber, although it should be noted that a white deposit will be left.
Stormdry is a BBA approved colourless deep penetrating water repellent cream for brick, stone, and concrete. Due to its cream-based formulation it is able to penetrate more deeply into masonry than standard liquid-applied brick sealer products and is a one coat applications.
Protects against penetrating damp, improves thermal efficiency (energy savings) and has a life expectancy of 20-30 years.
Stormdry is easy to apply using a brush or roller and only a single coat application is required - many competing water repellent products require two coats.
Coverage: 24sq mts per 5L
Pack size: 5L & 20L
Breathable and Colourless
Stormdry's silane/siloxane technology works by lining the pores of porous bricks, rather than blocking them - allowing the wall to continue to breathe. This is in contrast to many standard brick sealer products, which coat the masonry with a thin film
Stormdry has been specially formulated to be colourless once dry, which allows the walls to retain their original appearance once protected against penetrating damp.
25 Year protection in a Single Coat
BBA testing showed that Stormdry Water Repellent Cream offers 25 year protection against penetrating damp. Its cream formulation allows it to penetrate deeper into porous bricks than standard brick sealants. For this reason Stormdry saves time and hassle by only requiring one coat, where other products require two or more.
Energy Saving
By providing in-depth protection against moisture ingress, Stormdry is able to save energy. Tests carried out by the University of Portsmouth demonstrate that energy savings of up to 29% are possible by keeping walls dry using Stormdry. This is because dry walls are better insulators than wet walls.
Freeze/thaw resistance
BBA testing showed that Stormdry is resistant to the effects of freeze/thaw cycling. By preventing water ingress into walls, Stormdry reduces the risk of spalling bricks.
Stormdry treated masonry can be over-painted with a water based exterior grade emulsion masonry paint. This should be done within 3-10 days of the Stormdry application, if this is left any longer the surface beading which develops can inhibit the paint adhering to the surface.
